HD-TVI Bullet Camera 3.6mm 2MP – 1080P camera that can use siamese or RG59 cable. It has 24 IR LEDS that can be used in dark situations to be able to see up to 65ft away. Only compatible with HD-TVI DVRS. (not with old analog DVRS) It is an outdoor/indoor camera that is super easy to mount. With a 3.6mm lens you have a nice wide angle that is approx. 75 degrees. Is the ideal replacement for the ADT Bullet Camera A-CB7D36PI or the A-CB7D60PI.
2.1MP High Definition
Full HD 1080P
3.6mm Fixed Lens
24 IR LEDs up to 65ft
High performance CMOS sensor and high resolution bring high-quality image;
Low illumination ; OSD menu, parameters are configurable; Support auto white balance, auto gain control, electronic shutter control; SMART IR mode;
Unit transmission control; Advanced 3-axis design meets different installation on requirements.
Specifications of the HD-TVI Bullet Camera 3.6mm 2MP
NTSC / PAL(Euro Version)
0.01 Lux @ (AGC ON),0 Lux with IR
NTSC: 1/30 ~ 1/50,000
PAL: 1/25 ~ 1/50,000
Day & Night
Video Frame Rate
HD Video Output
1 HD-TVI output
More than 52dB
-4°F – 140°F (-40 °C – 60 °C)
Humidity 90% or less (non-condensing)
Weather Proof Ratings
φ2.8″ × 5.9″ (φ70.0 ×149.5mm)
1.Drill the screw holes and the cable hole in the ceiling according to the supplied drill template.
2.Hammer the supplied plastic expansion bolt into the screw holes.
3.Route the cables to the cable hole and connect the corresponding power cable and video cable.
4.Fix the camera to the ceiling with the supplied screws.